Tag: paths of travel

Funding ADA infrastructure with TAP Funds

Franklin County Mo, Courthouse

Ensuring infrastructure such as sidewalks, curb ramps, and buildings are in compliance with the Americans with Disabilities Act (ADA) standards are major issues for many states and localities across the nation. While good work is being done to create paths and spaces accessible to all, many municipalities are discovering that funding poses a major barrier to their efforts.

The Federal Surface Transportation Program provides funding to States and localities for transit capital projects like roads, bridges, and highways.  Unfortunately there are frequently more projects than money to go around. Cooperation among localities can be key to creating the most favorable conditions of approval for the most needed projects.  “At the Oct. 24 Franklin County Transportation Committee meeting, Union City Engineer Jonathan Zimmermann requested that cities in the county, other than Union, not seek Surface Transportation Program (STP) and Congestion Mitigation and Air Quality Improvement Program (CMAQ) grant funding.”  The hope is, by limiting grant requests to the East-West Gateway Council of Governments (EWGW) to a sole project, the Highway 47 and Highway 50 improvement project would be awarded funds by default.

While it may seem unfortunate or unfair that these requests be made, in this situation at least, it is an idea that has wide support.  Fortunately STP funds are not the only source of money, provided the localities have been proactive with related requirements, such as having an up-to-date ADA  transition plan.

The Transportation Alternatives Set-Aside program authorizes funding for programs and projects including on- and off-road pedestrian and bicycle facilities, infrastructure projects for improving non-driver access to public transportation and enhanced mobility, in addition to many other projects in the public right-of-way.  According to John Nilges, The City of Washington’s public works director, “the city has an advantage [in seeking TAP funds] over many other communities in the EWGW region because it has an Americans With Disabilities Act (ADA) transition plan.”

With increasing scrutiny around ADA compliance and funding being tied more closely to compliance with federal requirements in general.  Compliance work in creating an accessible and equitable community for all is critically important to bettering people’s lives and obtaining much needed funding for States and localities.

Source: City Still to Seek Grant for Sidewalks — Won’t Interfere With Request
By: Gregg Jones, Missourian Staff Writer, Nov 3, 2019
http://www.emissourian.com/local_news/county/city-still-to-seek-grant-for-sidewalks-won-t-interfere/article_312abc12-fcd4-11e9-afab-1fc732c616e2.html

ADA 101 – Counter Slope

ADA 101 info graphic, with ADAS 2010 section 406.2 code and example pictures2010 ADAS 406.2 Counter Slope

Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20, 5%. The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level.

Code according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Extended Floor or Ground Surface

ADA 101 info graphic, with ADAS 2010 section 405.9.1 code and example pictures

2010 ADAS 405.9.1 Extended Floor or Ground Surface

The floor or ground surface of the ramp run or landing shall extend 12 inches minimum beyond the inside face of a handrail complying with 505.

Code according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

New Hampshire Governor’s Accessibility Award goes to The Nature Conservancy

The new accessible trail in the Ossipee Pine Barrens

The new accessible trail in the Ossipee Pine Barrens. Photo by Jeff Lougee

Connecting with nature is a path to healing and positive growth for many people.  Creating the infrastructure to help make natural spaces accessible to people of all abilities is an ambitious and worthy effort we can all support.  In recognition of this kind of work, the “New Hampshire Governor’s Commission on Disability recently honored The Nature Conservancy in New Hampshire for the creation of an accessible trail at the Ossipee Pine Barrens Preserve.”

The individuals and organizations chosen to receive the Governor’s Accessibility Award are recognized for their initiatives that embody the mission of the Americans with Disabilities Act.  Awards like these are a great way for public officials to highlight the important work of private and non-profit organizations in helping create accessible communities.  

Source:
Nature Conservancy wins Governor’s Accessibility Award 
By: Staff Writer Sep 24, 2019 Updated Sep 25, 2019
https://www.conwaydailysun.com/business/local/nature-conservancy-wins-governor-s-accessibility-award/article_19f10440-dbc1-11e9-9da3-2b97d479c6d8.html

ADA 101 – Doors in Series and Gates in Series

ADA 101 Info graphic with ADAS 2010 section 404.2.6 text and example pictures ADAS 2010 404.2.6 Doors in Series and Gates in Series

The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches minimum plus the width of doors or gates swinging into the space.

Code according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Clear Width at Turn

ADA 101 Info graphic with ADAS 2010 403.5.2 text and example pictures2010 ADAS 403.5.2 Clear Width at Turn

Where the accessible route makes a 180 degree turn around an element which is less than 48 inches wide, clear width shall be 42 inches minimum approaching the turn, 48 inches minimum at the turn and 42 inches minimum leaving the turn.

EXCEPTION: Where the clear width at the turn is 60 inches minimum compliance with 403.5.2 shall not be required.

Code according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

 

ADA 101 – Walking Surface Slope

ADA 101 info-graphic with ADAS 2010 403.3 text and example pictures

2010 ADAS 403.3 Walking Surfaces Slope

The running slope of walking surfaces shall not be steeper than 1:20 (5%). The cross slope of walking surfaces shall not be steeper than 1:48 (2%).

Code according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Walking Surfaces Clear Width

ADA 101 info graphic with ADAS 2010 section 403.5.1 text and example pictures2010 ADAS 403.5.1 Walking Surfaces – Clear Width

Except as provided in 403.5.2 and 403.5.3, the clear width of walking surfaces shall be 36 inches minimum.

EXCEPTION: The clear width shall be permitted to be reduced to 32 inches minimum for a length of 24 inches maximum provided that reduced width segments are separated by segments that are 48 inches long minimum and 36 inches wide minimum.

Code according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Vertical Clearance

ADA 101 Infographic with ADAS 2010 section 307.4 test and example picturesADAS 2010 307.4 – Vertical Clearance

Vertical clearance shall be 80 inches high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches high. The leading edge of such guardrail or barrier shall be located 27 inches maximum above the finish floor or ground.

EXCEPTION: Door closers and door stops shall be permitted to be 78 inches minimum above the finish floor or ground.

Code according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Handrail Height

Graphic with ADAS 505.4 text and two pictures, one picture of a non-compliant handrail and one of complaint handrails. 2010 ADAS 505.4 –  Handrail Height

Top of gripping surfaces of handrails shall be 34 inches minimum and 38 inches maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.

Advisory 505.4 Handrail Height. The requirements for stair and ramp handrails in this document are for adults. When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches minimum, should be provided to help prevent entrapment.

Code according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

Scroll to top
Font Resize
Contrast