Month: July 2021

ADA 101 – L-Shaped Shower Seat

ADA 101 info graphic with ADAS 2010 section 608.2.1 text and example pictures 2010 ADAS 610.3.2 L-Shaped Shower Seat

The rear edge of an L-shaped seat shall be 2 1/2 inches maximum and the front edge 15 inches minimum and 16 inches maximum from the seat wall. The rear edge of the “L” portion of the seat shall be 1 1/2 inches maximum from the wall and the front edge shall be 14 inches minimum and 15 inches maximum from the wall. The end of the “L” shall be 22 inches minimum and 23 inches maximum from the main seat wall.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Transfer Type Shower Compartments

ADA 101 info graphic with ADAS 2010 section 608.2.1 text and example pictures 2010 ADAS 608.2.1 Transfer Type Shower Compartments

Transfer type shower compartments shall be 36 inches by 36 inches clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch wide minimum entry on the face of the shower compartment. Clearance of 36 inches wide minimum by 48 inches long minimum measured from the control wall shall be provided.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Alternate Roll-In Type Shower Compartments

ADA 101 info graphic with ADAS 2010 section 608.3.3 code text and example pictures 2010 ADAS 608.3.3 Alternate Roll-In Type Shower Compartments

In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided above the seat. Grab bars shall be installed 6 inches maximum from adjacent walls.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Grab Bars in Standard Roll-In Type Shower Compartments

ADA 101 info graphic with ADAS 2010 section 608.3.2 code text and example pictures2010 ADAS 608.3.2  Garb Bars in Standard Roll-In Type Shower Compartments

Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Where a seat is not provided in standard roll-in type shower compartments, grab bars shall be provided on three walls. Grab bars shall be installed 6 inches maximum from adjacent walls.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

Scroll to top
Font Resize
Contrast