Tag: ADAS

ADA 101 – Controls in Standard Roll-In Type Shower Compartments

ADA 101 info graphic with ADAS 2010 section 608.5.2 text and example pictures2010 ADAS 608.5.2 Controls in Standard Roll-In Type Shower Compartments

In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches above the shower floor. Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches maximum from the seat wall.

Advisory 608.5.2 Standard Roll-in Type Shower Compartments. In standard roll-in type showers without seats, the shower head and operable parts can be located on any of the three walls of the shower without adversely affecting accessibility.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Spacing of Grab Bars

ADA 101 info graphic with ADAS 2010 section 609.3 text and example pictures2010 ADAS 609.3 Spacing of Grab Bars

The space between the wall and the grab bar shall be 1 1/2 inches. The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches minimum. The space between the grab bar and projecting objects above shall be 12 inches minimum.

EXCEPTION: The space between the grab bars and shower controls, shower fittings, and other grab bars above shall be permitted to be 1 1/2 inches minimum.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Grab Bars in Standard Roll-In Type Shower Compartments

ADA 101 info graphic with ADAS 2010 section 608.3.2 code text and example pictures2010 ADAS 608.3.2  Garb Bars in Standard Roll-In Type Shower Compartments

Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Where a seat is not provided in standard roll-in type shower compartments, grab bars shall be provided on three walls. Grab bars shall be installed 6 inches maximum from adjacent walls.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Standard Roll-In Type Shower Compartments

ADA 101 info graphic with ADAS 2010 section 608.2.2 code text and example pictures2010 ADAS 608.2.2 Standard Roll-In Type Shower Compartments

Standard roll-in type shower compartments shall be 30 inches wide minimum by 60 inches deep minimum clear inside dimensions measured at center points of opposing sides and shall have a 60 inches wide minimum entry on the face of the shower compartment.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Bathtubs With Permanent Seats Back Wall

ADA 101 info graphic with ADAS 2010 section 607.4.1.1 code text and example pictures 2010 ADAS 607.4.1.1 Bathtubs With Permanent Seats Back Wall

Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and the other located 8 inches minimum and 10 inches maximum above the rim of the bathtub. Each grab bar shall be installed 15 inches maximum from the head end wall and 12 inches maximum from the control end wall.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Ambulatory Accessible Toilet Compartment Size

ADA 101 info graphic with ADAS 2010 section 604.8.2.1 code text and example pictures 2010 ADAS 604.8.2.1 Ambulatory Accessible Toilet Compartment Size

Ambulatory accessible compartments shall have a depth of 60 inches minimum and a width of 35 inches minimum and 37 inches maximum.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Bottom Extension at Stairs

ADA 101 info graphic with ADAS 2010 section 505.10.3 code text and example pictures 2010 ADAS 505.10.3 Bottom Handrail Extension at Stairs

At the bottom of a stair flight, handrails shall extend at the slope of the stair flight for a horizontal distance at least equal to one tread depth beyond the last riser nosing. Extension shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Top Extension at Stairs

ADA 101 info graphic with ADAS 2010 section 505.10.2 code text and example pictures2010 ADAS 505.10.2 Top Extension at Stairs

At the top of a stair flight, handrails shall extend horizontally above the landing for 12 inches minimum beginning directly above the first riser nosing. Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Non-Circular Cross Sections

ADA 101 info graphic with ADAS 2010 section 505.7.2 code text and example pictures2010 ADAS 505.7.2 Non-Circular Cross Sections

Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches minimum and 6 1/4 inches maximum, and a cross-section dimension of 2 1/4 inches maximum.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Toe Clearance Width

ADA 101 info graphic with ADAS 2010 section 306.2.5 code text and example pictures2010 ADAS 306.2.5 Toe Clearance Width

Toe clearance shall be 30 inches wide minimum.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

Scroll to top
Font Resize
Contrast