Tag: roll

ADA 101 – Grab Bars in Standard Roll-In Type Shower Compartments

ADA 101 info graphic with ADAS 2010 section 608.3.2 code text and example pictures2010 ADAS 608.3.2  Garb Bars in Standard Roll-In Type Shower Compartments

Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Where a seat is not provided in standard roll-in type shower compartments, grab bars shall be provided on three walls. Grab bars shall be installed 6 inches maximum from adjacent walls.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

ADA 101 – Standard Roll-In Type Shower Compartments

ADA 101 info graphic with ADAS 2010 section 608.2.2 code text and example pictures2010 ADAS 608.2.2 Standard Roll-In Type Shower Compartments

Standard roll-in type shower compartments shall be 30 inches wide minimum by 60 inches deep minimum clear inside dimensions measured at center points of opposing sides and shall have a 60 inches wide minimum entry on the face of the shower compartment.

Citation according to 2010 ADAS. Check your state’s accessibility laws. Some states such as California, Georgia and Florida have additional requirements and standards.

Scroll to top
Font Resize
Contrast