ADA 101 – Clear Width at Turn
2010 ADAS 403.5.2 Clear Width at Turn Where the accessible route makes a 180 degree turn around an element which is less than 48 inches …
ADA 101 – Walking Surface Slope
2010 ADAS 403.3 Walking Surfaces Slope The running slope of walking surfaces shall not be steeper than 1:20 (5%). The cross slope of walking surfaces …
ADA 101 – Walking Surfaces Clear Width
2010 ADAS 403.5.1 Walking Surfaces – Clear Width Except as provided in 403.5.2 and 403.5.3, the clear width of walking surfaces shall be 36 inches …
ADA 101 – Operable Parts
2010 ADAS 309.4 Operable Parts – Operation Operable parts shall be operable with one hand and shall not require tight grasping, pinching, or twisting of …
BlueDAG University – How to Create an Evaluation
Victor Felix, BlueDAG’s Director of Content and Accessibility, shows users how to create an evaluation in the BlueDAG portal.
ADA 101 – Vertical Clearance
ADAS 2010 307.4 – Vertical Clearance Vertical clearance shall be 80 inches high minimum. Guardrails or other barriers shall be provided where the vertical clearance …
ADA 101 – Vision Lights
2010 ADAS 404.2.11 – Vision Lights Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing …
ADA 101 – Door and Gate Surfaces
2010 ADAS 404.2.10 – Door and Gate Surfaces Swinging door and gate surfaces within 10 inches of the finish floor or ground measured vertically shall …
ADA 101 – Handrail Extensions at Ramps
2010 ADAS 505.10.1 – Handrail Extensions at Ramps Ramp handrails shall extend horizontally above the landing for 12 inches minimum beyond the top and bottom …